Single Size Pack 25 Pieces (600 x 400 x 30 mm)

6.12m2 / 25 Paving Slabs
was £287.58inc VAT £239.65ex VAT
Per m² £32.02 per m²inc VAT £26.68 per m²ex VAT
/
£195.99inc VAT £163.32ex VAT
In Stock (2)
Only 2 left

Product Summary

10-14 DAY LEAD TIME FOR PROVENCAL ORDERS

Please allow 10-14 days delivery when ordering Provencal Decorative Concrete in Aero Buff.  Please read our delivery information HERE for further information. 

See Full Description

Key features

  • French Classic - decorative concrete flagstone reminiscent of limestone slabs in Provence Cote d'Azur
  • Style - A reproduction limestone paving flag with delicate natural face detailing and straight sawn edge appearance
  • Premium Range - this is product is designed to provide great performance at a competitive price
  • Durable - concrete is less susceptible to weathering than natural stone, with less chance of it aging and changing in appearance
  • Riviera Lifestyle - smooth paving especially suits contemporary garden design with subtle wheat limestone colouration
  • Colour - Wheat / Light Gold
Product details

A reproduction limestone paving flag with delicate natural face detailing and straight sawn edge appearance. This authentically reproduced smooth paving especially suits contemporary garden design. The limestone colouration provides a natural look which is complementary to modern garden designs and properties.

Provencal Decorative Concrete Paving - This light yellow concrete paving slab with cream undertones has a smooth surface with straight edges for a modern contemporary look.

Concrete Curing & Installation

Concrete flags are not fully cured when you install them. The curing process can take many years to complete. Therefore, there are a few precautionary steps you need to take to ensure that differential curing (varying rates of curing) are avoided. Most of these step involve ensuring that water, moisture and damp are not adversely effecting the slabs.

  • Use a full bed of mortar on the laying course
  • Ensure that the bedding mortar of the laying course is not too wet to avoid excessive moisture transfer
  • Use either an SBR bond in the bedding mortar or priming slurry on the backs of the concrete flags to help avoid moisture transfer to the slabs from the bedding layer
  • Ensure the paving has sufficient drainage and an appropriate fall/gradient, so surface water can run off the paving to avoid standing water
  • Use an appropriate jointing compound that is waterproof to prevent water entering the joints of the paving.

By taking these steps, you can help avoid some of the potential causes of differential curing/weathering with concrete flags.

Laying Advice

To install and lay concrete patio paving slabs, you'll need to do the following steps:

  1. Measure up and mark out your patio - ensure you calculate both 1) area in square metres (m2)  and 2) the fall (slope) required for drainage.
  2. Dig out the patio area to create the substrate (220 -230 mm depth).
  3. Lay the sub-base of MOT Type-1 hardcore (compacted & 150 mm depth).
  4. Ensure you mix and blend the various paving packs to ensure that any potential colour variation in manufactured batches are not discernable
  5. Coat the slabs' underside with priming slurry to improve their bond and help prevent moisture transfer. As concrete is porous, priming slurry will help protect the slabs from moisture transfer and capillary action from beneath the flags.
  6. Trowel-in and lay a bedding course of mortar mix (50 mm depth) immediately prior to laying each slab. Make sure this mix is not too wet to avoid moisture transfer to the flags.
  7. Lay the paving slabs on to the mortar bed and tamp down. Ensure you leave the desired joint spacing between the slabs and the slabs are “level” to the fall.
  8. Leave to set for 24 hours, so the mortar mix can cure enough for you to walk on the flags.
  9. Fill the joints between the paving with an epoxy based waterproof jointing compound. This will prevent water ingress between/under the concrete flags.
  10. Optional: protect your paving by sealing the slabs with a purpose made sealant (natural finish or colour enhancing).

To calculate the areas of paving in square-metres (m2), the amount of sub-base hardcore or the amount of sand and cement you'll need for the mortar mix bedding course, please refer to our paving calculators.

For the full step-by-step guide with videos for each step, see our How to Lay Patio Paving Slabs article.

Care & Maintenance

Concrete is a porous material and contains tiny capillaries and micro-fissures throughout its structure. Consequently, concrete paving is susceptible to water-based chemical erosion (acidic corrosion), physical erosion (frost action), and from staining from waterborne grime, salts and other mineral and particulate deposits. Therefore, as the UK has high winter humidity (generally 80-90%) and damp conditions are the norm, we recommend that you help protect and elongate the life of your paving by sealing the slabs against the water/damp based issues. Our impregnating sealers are designed to enter the capillaries and micro-fissures in the slabs, blocking those spaces to prevent water entering the paving.

  1. Natural finish sealer
  2. Colour enhancing sealer

In addition to sealing the slabs, we recommend ensuring you brush away leaves, dirt and other detritus regularly, especially in the autumn and winter when leaves, twigs, seeds and other windfall materials are likely to fall on your patio. If left on your paving, especially if damp, and worse still, allowed to rot down and become mulch-like, your paving will almost certainly acquire brown stains from the release of tannins from the windfall materials (think a used tea bag left on a kitchen counter for a model of what will happen).

As well as brushing off dirt and windfall materials, give your patio a hose down with water every so often. Use a low-pressure hose or keep any jet-wash far enough away from the slabs to ensure you don't damage them with the high-pressure water jet. For more stubborn stains and the build-up of grime, we recommend using a specialist non-acidic patio cleaner.

 

Specifications
No. of Pieces 25
Pack Coverage (m²) 6.12
Range Decorative Stone-Effect
Prod Type Concrete Paving Slabs
Mini/Split Available No
Material Concrete
Finish Textured
Finish (Edge) Tapered / rounded
Colour Cream
Colour Group White
Dimension (W) 600
Dimension (H) 400
Dimension (D) 30
Interior / Exterior Exterior / Interior
Style Classic
Pack Contents 600 x 400
Pack Sold As Single Size Pack
Pack Description

600 x 400 Qty 25

Pieces Description Paving Slabs

Usually replenished within days